Steering cable length issues; 14ft Fletcher

[onemanorthree]

All,

I'm having some issues getting the length correct for my steering cable on the 14ft Fletcher Arrowflight.
That cable that I bought it with was a rack and pinion, however it snapped at the end of the season.
I decided to replace it with a rotary system, and replace the helm also.

I always thought the original cable was too long and it snaked heavily down the side of the boat. Fig 1
The cable is marked with 4.25m, which when converted, is 14ft. So when I sent the detail to the marine shop, they sold me a 14ft cable rotary system.

I fitted this but was way too long, too long even to snake it up the side of the boat, there was 2 foot left by the time it got to the helm.
The cable the sold me is also about a foot longer than the original cable too, which I don't understand.

My questions are.
Are R&P cables measured differently to rotary?
The A, B , C measurements are A=40cm, B = 250cm, C=55cm a total of 11.3ft. I was told to round up to the next foot after this, do I get a 12ft cable?
Does anybody know what length is the right rotary length for this boat?

Thanks

Fig 1 - Cable was snaking heavily down the side of the boat,


Cables side by side - Red is the old one



Original R&P


Pretech 5500 14 en - New

3000 STEERFLEX STEERING SYSTEM 9ft

 

[Rappey]

Lay out cable and route it from helm then see how much shorter it needs to be at the outboard end ?
Maybe you've sorted it out now ?

 

[stelican]

Consider taking boat to the yard who are supplying cable/ helm