Chris_d

Think I would be minded to agree with the EA on this one, once everybody gets over the ooh..ahh nice goat stuff, they will basically eat...

No part 23 is the grease nipple you can see it at the bottom in the photo, worth pumping some grease in and seeing if it makes a...

Check the top of the steering arm inside it has a grease nipple on the top which needs doing reguarly.

I had the same setup and it is very light on those volvos you can lock to lock with one finger, brilliant. ONly reason to go stiff if...

Plan it well and pick your weather window, it will be a great adventure. My passage plan from Torquay would not take me down the...

Could try contacting these guys RiverWorks Ltd. Specialists in Waterborne Construction whilst they are not based on the Tideway I'm sure...

If you look closely at the photo there is shale and gravel on the left side of the hull which is relatively stable, but on the right...

I'm no expert but that always going to be a problem with a drying mooring, the mud will shift and erode due to rain and current and all...

Easy, lower the canopy obviously 😀 Draft looks like the bigger issue though.

Great video, never seen inside Chiswick Quay Marina I assumed all the boats were held prisoners in there 😀 . Were you able to leave and...

Might only be a couple of hours from Teddington but its got to be much easier to attend for you guys, its 3 days away and 3 days back...

Got one of these lockers on our boat, what are they intended for? as they are always potentially wet they seem of limited use, can't...

Interested to know what is considered acceptable down there as presumably these boats weren't actually breaking the speed limit but were...

I have been given a large package of ATYC memorabilia by one of the granddaughter of Nobby Pearce (who founded the ATYC). We had hoped...

I have KAD44's and the engine data read out is about 3-4 degC hotter compared to the analogue gauges. Seem to remember a post on here...